XGecu Pro T76 EPROM/ EEPROM/PLC/BIOS programmør, USB-C

Varenr: H31407

EAN: 5705412314077

T56 er den nye Xgecu Pro-version, som understøtter et bredere chipområde, større kapacitet og hurtigere hastighed. Softwaregrænsefladen er klar, smidig og nem at bruge. Flere funktioner samt nem at opgradere software. Ultra-høj omkostningsydelse, velegnet til små batchprogrammering under 5000, også velegnet til udviklere og professionelt vedligeholdelsespersonale.

Egenskaber:

Understøtter chip model: 24/25/26/93 seriel EEPROM, 27/28/29/36/37/39/49/50 EPROM, Paged EPROM, FLASH hukommelse (NOR, NAND, SPI NAND, EMMC, NVRAM, SRAM, CPLD (GAL) osv.
Understøtter huse: DIP42, PLCC44, SOP44, FP44, TSOP48, TSOP56, BGA48, BGA63, BGA64, BGA100, BGA153, BGA162, BGA169, BGA221 på basis af TL866II
NAND EMMC understøtter maks. kapacitet op til 256G
Understøtter logisk IC-testning
Understøtter VGA_HDMI ISP og VGA-værktøjer
Sammenlignet med den generelle 48-bens universelle programmør har denne 56-benede fulddrev yderligere 8 universelle IO-porte. Fordelen ved de 56 universelle drev er, at alle chips under 56 ben kun behøver én adapter i samme pakke. Eksempel: En generel TSOP56-adapter, som kan programmere hele TSOP56, TSOP48, TSOP40, TSOP32 på T56-programmøren. en TSOP56-adapter svarer til funktionen af fem adaptere til den almindelige 48-bens universelle programmør.
For chips med høj kapacitet opfylder eller overgår T56-programmøren hastigheden for de fleste specialiserede programmører
En fremragende programmør. Hvis programmørens hovedcontroller kan arbejde ved en højere hastighed, bestemmes dens stabilitet og hastighed af den højeste driftsfrekvens, der understøttes af stifterne. Jo højere frekvens, jo bedre anti-interferensevne., Mere stærkere og mere pålidelig.
T56-stiften testet med frekvensen er så høj som 70MHZ. Pin-driftsfrekvensen er mere end 3 gange højere end mange lignende programmører. Dette er hovedårsagen til, at T56 kan arbejde pålideligt ved en meget høj hastighed for højhastighedschips med stor kapacitet.
På den anden side kan det også siges, at programmørens hastighed også er en manifestation af programmørens pålidelighed.
T56 når næsten grænsehastigheden for USB2.0 (HS 480MHZ) transmission ved læsning af EMMC-chip med stor kapacitet.

Specifikationer:

Programmeringsparametre:
- 32-bit MCU 200MHZ + Xilinx SP6 FPGA struktur, USB2.0 HS 480MHZ transmission
- 56 pin fuld drev IO design. Alle ben har en maks. driftsfrekvens på 50MHZ og høj pålidelighed.
- Stabil og pålidelig 8Pins in-circuit programmeringsgrænseflade, ledningsbredden er mere end 30CM, og den kan kommunikere pålideligt ved 25MHZ.
- 25 serie / EMMC in-circuit programmering med en maks. klokfrekvens på 40MHZ-50MHZ
VCC spænding 1,2-6,5V 64 niveauer justerbar, VPP spænding 6,5-25V 64 niveauer justerbar
IO kommunikationssignalspænding trinløst justerbar 1,2V-3,6V
VCC 120MA-320MA overstrømsbeskyttelse kontinuerligt justerbar
VPP 120MA overstrømsbeskyttelse
Strømforsyning:
- 5V <500MA. Alle chips behøver ikke ekstern strømforsyning
- Kan tilsluttes en ekstern strømforsyning 5V-5,5V 500MA for multiprogrammering
- Flere beskyttelser til den eksterne strømforsyning: overspændingsbeskyttelse / omvendt forbindelsesbeskyttelse / overstrømsbeskyttelse / lavspændingsmeddelelse
Skrive EMMC-hastighed: 12MB/s-25MB/s
Læse EMMC-hastighed: 14MB/s-45MB/s er 2-5 gange hurtigere end tilsvarende programmører

T56 is the new Xgecu Pro version which supports a wider chip range, larger capacity and faster speed.The software interface is clear, smooth and easy to use. more functions. easy to upgrade software. Ultra-high cost performance, suitable for small batch programming below 5000, also suitable for developers and professional maintenance personnel.

Features:

Support chip model: 24/25/26/93 serial EEPROM, 27/28/29/36/37/39/49/50 EPROM, Paged EPROM, FLASH memory (NOR, NAND, SPI NAND, EMMC, NVRAM, SRAM, CPLD (GAL), etc.
Support package: DIP42, PLCC44, SOP44, FP44, TSOP48, TSOP56, BGA48, BGA63, BGA64, BGA100, BGA153, BGA162, BGA169, BGA221 on the basis of TL866II
NAND EMMC supports maximum capacity up to 256G
Support Logic IC Testing
Support VGA_HDMI ISP and VGA Tools
Compared with the general 48-pin universal programmer, the 56-pin full drive has 8 more universal IO ports. The advantage of the 56 universal drives is that the all chips below 56 pins only need one adapter in the same package. Example: A general TSOP56 adapter, which can program all of TSOP56, TSOP48, TSOP40, TSOP32 on the T56 programmer. one TSOP56 adapter is equivalent to the function of five adapters of the ordinary 48-pin universal programmer.
For high-capacity chips, the T56 programmer meets or exceeds the speed of most specialized programmers
An excellent programmer. If the main controller of the programmer can work at a higher speed, its stability and speed determined by the highest operating frequency supported by the pins. The higher frequency, the better of anti-interference ability.,more stronger and more reliable.
The T56 pin tested with the frequency is as high as 70MHZ. The pin operating frequency is more than 3 times that of many similar programmers. This is the main reason why the T56 can work reliably at a very high speed for large-capacity high-speed chips.
On the other hand, it can also be said that the speed of the programmer is also a manifestation of the reliability of the programmer.
T56 almost reaches the limit speed of USB2.0 (HS 480MHZ) transmission when reading EMMC large-capacity chip.

Specifications:

Programmer parameters:
- 32-bit MCU 200MHZ + Xilinx SP6 FPGA structure, USB2.0 HS 480MHZ transmission
- 56 pin full drive IO design. All pins have a maximum operating frequency of 50MHZ and high reliability.
- Stable and reliable 8Pins in-circuit programming interface, the wire Lehgth is more than 30CM,and it can communicate reliably at 25MHZ.
- 25 series / EMMC in-circuit programming with a maximum clock frequency of 40MHZ-50MHZ
VCC voltage 1.2-6.5V 64 levels adjustable, VPP voltage 6.5-25V 64 levels adjustable
IO communication signal voltage continuously adjustable 1.2V-3.6V
VCC 120MA-320MA overcurrent protection continuously adjustable
VPP 120MA overcurrent protection
Power supply:
- 5V <500MA. All chips do not need external power supply
- Can be connected to an external power supply 5V-5.5V 500MA for multiple programming
- Multiple protections for the external power supply: overvoltage protection / reverse connection protection / overcurrent protection / low voltage prompt
Write EMMC Speed: 12MB/s-25MB/s
Reading EMMC speed: 14MB/s-45MB/s is 2-5 times faster than similar programmers